The structural stability and overall success of the 305 System depends firstly on the structural soundness of your walls, and secondly, on the manner in which the system is installed. Simpliform is unable to accept liability for the condition and stability of the walls against which the system is to be installed. We are also unable to accept liability if the installation procedure differs from that which is detailed in the instructions provided with each system.

Please be certain of your wall type(s) prior to commencing any installation works, and ensure you are using the correct fasteners for your wall type(s). Note – we do not recommend fixing the 305 System to lath and plaster walls. If you are unsure of your wall type, please consult an expert for assistance.

The 305 System must only be used to support static (stationary) loads. It must not be used for any dynamic (moving) loads, including climbing or sitting on any part of the system.

The colours of products when viewed on your computer monitor may appear different than the actual colour of the delivered merchandise. Simpliform makes every attempt to give you a realistic representation of the colours of each item available, however many factors can influence the perception of colour in your environment. To minimise colour variations between separate 305 Systems, we recommend that all systems being installed in the same room be ordered at the same time. It is important to note that real timbers will have a natural variation in timber grain, colour and texture. Simpliform cannot guarantee the colour or grain of real timber veneers. These products will also change colour gradually over time. This colour change is considered normal.

When you place an order, you are agreeing to this disclaimer.